Micropox Microcement 10m2 Wall Kit No Mesh System

This listing is for a full kit for wall application  without mesh

Please choose your chosen shade from the colour swatches available.

Floor system without mesh

• Microtac NP primer - 1 coat
  
• 12.85kg Medium - 1 Coat 
• 9.85kg Fine - 2 Coat's
• 1L Pavipol M100 - 1 or 2 coats
  
• Tix to be mixed with Medium and fine Tubs

What you will recieve:

• Microtac NP part A 5kg part B 1kg
• Medium part A 12kg and Part B 850g
• Fine part A 9kg and Part B 850g
• 1L Pavipol M100 Tub
• 100g Tix o be mixed with medium and fine Tubs

APPLICATION :

1. MICROTAC NP

• Suitable for low absorption surfaces, contains a silica aggregate primer; not for use with mesh
• NP is a two-component solvent-free epoxy primer
• Epoxy (do not add water); use solvent (e.g. acetone) to clean tools
• Apply small amounts depending on area and awkwardness
• Apply in a criss cross/2 direction, ensure a nice coat without spreading it too thin as it is crucial for the medium
• YIELD: 250g per m2

2. MICROPOX MEDIUM

• Medium is a two-component coating, eliminating the need for sanding. Ensure a flat application, and sanding is optional.
• Recommended application weight is 500 g per coat, providing a balanced finish.
• Making sure you reduce any scratches by figure of eight or going back over and giving it a flatten down.
• The grain size is 0.4 mm, contributing to a fine texture.
• Choose your preferred trowel—flexible plastic or normal—as both are compatible.
• For added flexibility, you can introduce a 3% water addition, reducing viscosity.
• The pot life is influenced by humidity and temperature, typically lasting 30/45 minutes at a temperature of 20°C.
• Optional. once you’ve applied your first coat of medium, you can apply another coat of medium in a Half moon pattern as the finishing coat, and then apply sealer.
• YIELD: 700g per m2

Proper mixing of Medium is essential to ensure uniform consistency and performance.

IMPORTANT : If using on a wall application you need to add TIX which is a binder to mix into medium and fine products, failure to mix in TIX will result in sagging of the product.

3. MICROPOX FINO (FINE)

• This two-component system
• Before applying the fine, make sure you are happy and you don’t have any imperfections/straight lines if you do sand back
• when applying the first coat just watch how the product is behaving and change the pressure and angle of the trowel to give you the best results.
• Introducing a 3% water addition offers lower viscosity.
• Keep the grain size at a maximum of 0.2 mm to achieve the desired texture.
• Pot life varies with humidity and temperature, typically lasting 30/45 minutes at a temperature of 20°C.
• With a yield of 500 g per m2, this application is well-suited for textured finishes.

Proper mixing of Fine is essential to ensure uniform consistency and performance.

IMPORTANT : If using on a wall application you need to add TIX which is a binder to mix into medium and fine products, failure to mix in TIX will result in sagging of the product.

4. PAVIPOL M100 SEALER

• Pavipol M 100 is a single-component mono sealer, preferred for its all-resin composition, making it ideal for heavy traffic areas and showers.
• Ensure to check if opened last month, and note its extended shelf life due to 50% more content than other sealers, resulting in a 100% solid resin sealer.
• Make sure you apply just the right amount and spread out the best you can , if you over apply this can lead to runs or glossy patches.
• Available in both Matt and Gloss finishes, combining the two creates a satin finish.
• YIELD: 60g/70g per m2

For those considering purchasing Micropox Microcement, we highly recommend attending our training course, which provides in-depth instruction on the full application process. This ensures the best possible results and helps you understand the correct techniques for a professional finish. While the product is available for purchase, we cannot be held responsible for errors made by untrained DIY enthusiasts. Ultimately, it is up to the individual to decide, but proper training is strongly advised to achieve a high-quality, long-lasting application.

Determination of surface hardness, UNE-EN 13892-6: 171 N/mm2