Micropox Microcement 10m2 Wall Kit | Mesh System

This listing is for a full kit for wall application 

Please choose your chosen shade from the colour swatches available, The first coat of Fine always has more pigment in than the 2nd coat.

SYSTEM 2 - Wall system with mesh

• 2.5kg Microtac AC applied with mesh 
  
• 12.85kg Base 1 Coat 
• 12.85kg Medium - 1 Coat 
• 9.85kg Fine - 2 Coat's
• 100g Tix will be added to base, medium and fine tubs
• 1L Pavipol M100 - 1 or 2 coats
  

What you will recieve:

• 2.5kg Microtac AC
  
• 10m2 Mesh
• Base part A 12kg and Part B 850g
• Medium part A 12kg and Part B 850g
• Fine part A 9kg and Part B 850g
• 100g Tix bag for each tub of Base, Medium, Fine
• 1L Pavipol M100 

APPLICATION :

1. MICROTAC AC

• Microtac AC is a water-based epoxy and single-component product
• Ensure enough product is applied for proper Mesh adhesion
• Consider using two people to prevent air pockets during application
• If air pockets occur, use a sharp knife to iron them out while the product is still wet, or sand/cut them out once dry
• Yield 250g/350g per m2

2. MICROPOX BASE

• Two-component water-based epoxy resin with mineral fillers
• Ensure thorough mixing for three minutes to achieve optimal consistency.
• Apply flat and evenly, finishing with random movements to avoid straight lines, making sure you reduce any scratches by figure of eight or going back over and giving it a flatten down.
• After drying, sand imperfections and wipe with a dry cloth and vacuum.
• Medium application may result in streaking, which is normal; tix mixing can prevent this on small floors.
• Customisable with colour for design flexibility.
• Ideally, sand within 12 hours; avoid waiting more than 48 hours as it becomes increasingly difficult.
• Grain size is 0.4/0.8, and a 3% water addition can lower viscosity.
• Pot life varies with humidity and temperature, typically lasting 30/45 minutes at 20°C temperature.
• YIELD: 700g per m2

3. MICROPOX MEDIUM

• Medium is a two-component coating, eliminating the need for sanding. Ensure a flat application, and sanding is optional.
• Recommended application weight is 500 g per coat, providing a balanced finish.
• Making sure you reduce any scratches by figure of eight or going back over and giving it a flatten down.
• The grain size is 0.4 mm, contributing to a fine texture.
• Choose your preferred trowel—flexible plastic or normal—as both are compatible.
• For added flexibility, you can introduce a 3% water addition, reducing viscosity.
• The pot life is influenced by humidity and temperature, typically lasting 30/45 minutes at a temperature of 20°C.
• Optional. once you’ve applied your first coat of medium, you can apply another coat of medium in a Half moon pattern as the finishing coat, and then apply sealer.
• YIELD: 700g per m2

Proper mixing of Medium is essential to ensure uniform consistency and performance.

4. MICROPOX FINO (FINE)

• This two-component system
• Before applying the fine, make sure you are happy and you don’t have any imperfections/straight lines if you do sand back
• when applying the first coat just watch how the product is behaving and change the pressure and angle of the trowel to give you the best results.
• Introducing a 3% water addition offers lower viscosity.
• Keep the grain size at a maximum of 0.2 mm to achieve the desired texture.
• Pot life varies with humidity and temperature, typically lasting 30/45 minutes at a temperature of 20°C.
• With a yield of 500 g per m2, this application is well-suited for textured finishes.

Proper mixing of Fine is essential to ensure uniform consistency and performance.

5. PAVIPOL M100 SEALER

• Pavipol M 100 is a single-component mono sealer, preferred for its all-resin composition, making it ideal for heavy traffic areas and showers.
• Ensure to check if opened last month, and note its extended shelf life due to 50% more content than other sealers, resulting in a 100% solid resin sealer.
• Make sure you apply just the right amount and spread out the best you can , if you over apply this can lead to runs or glossy patches.
• Available in both Matt and Gloss finishes, combining the two creates a satin finish.
• YIELD: 60g/70g per m2

IMPORTANT : If using on a wall application you need to add TIX which is a binder to mix into Base, medium and fine products, failure to mix in TIX will result in sagging of the product.

For those considering purchasing Micropox Microcement, we highly recommend attending our training course, which provides in-depth instruction on the full application process. This ensures the best possible results and helps you understand the correct techniques for a professional finish. While the product is available for purchase, we cannot be held responsible for errors made by untrained DIY enthusiasts. Ultimately, it is up to the individual to decide, but proper training is strongly advised to achieve a high-quality, long-lasting application.

Determination of surface hardness, UNE-EN 13892-6: 171 N/mm2